System Support

How to configulation Mikrotik receive DHCP Client from WLAN.

Pradit Pulatatang -
  1. Sign in Winbox go to menu Wireless > Wireless and enable wlan1.
  1. Set password, Go to Security Profiles on Wireless Tables Tap, Click + for set security profile.

*Pre-Shared Key is password connection Wi-Fi of your receive.

  1. Go back to WiFi Interfaces, double click interfaces wlan1 for config, go to Wireless Mode: choose to station and Security Profile that you created then click Scan...
  1. When pop up show on box Interface: choose to wlan1 then start and select Wi-Fi of your can use then click Connect. For example is "APR2_TOP"
  1. When status show "connected.." is worked.
  1. Set DHCP Client Wlan. IP > DHCP Client > press +, selete Interface: wlan1 then Apply and OK.
  1. Create Bridge group. Go to Bridge and press + , input Name of bridge then OK.
  1. Add Ports Interface to Bridge group. On windows Bridge click tap Ports click + then choose interface ether1,ether2, ether3, ether4 add to bridge group bridge1.
  1. Set DHCP Server for Bridge group. IP > DHCP Server > DHCP Setup selete DHCP Server Interface is bridge1 then next all time to end.
  1. Set NAT Rule for allow connect another website. IP > Firewall > NAT > .+., on General tap Chain: srcnat, and Action tap Action:masquerade then OK.
  1. Set Address for Bridge group of bridge1. IP > Address > .+. and input IP address of you need and interface: bridge1. press Apply and OK.
  1. Now, Check internet via Ping Test to google(8.8.8.8).

finished...